DC EGP40 Economy Range Glasswasher 400mm basket

£1,000.00 ( £1,200.00 inc. VAT)

DC Economy Range of glasswashers with an extra 40mm washing height.  Fast, economical and efficient.  Ideal for pubs and bars requiring quick turnaround.  Washes up to 16 pint glasses in 2 min programme.

Models available in this range:

EGP40 – Standard Model

EGP40 D – Standard Model with Drain Pump

EGP40 IS – Standard Model with Integral Softener

EGP40 IS D – Standard Model with Integral Softener and Drain Pump



Add to Wishlist
Add to Wishlist


DC EGP40 Economy Range Glasswasher 400mm basket

DC EGP40 Economy Range Glasswasher 400mm basket from the Economy Range of DC with increased washing height to accommodate specialist glasses such as Peroni, Bulmers, Cobra and Amstel. The DC Economy Range of glasswashers are an entry-level glasswasher focused on budget. Fitted with cost and energy saving features such as new energy saving wash pump this is a glasswasher ideal for those wishing to combine efficiency with superb product quality.

1 year parts only warranty is standard on this model.  Option of 1 year parts and labour warranty is available (additional charge). Please select at checkout.


  • Specially designed to fit Peroni, Bulmers, Cobra and Amstel glasses
  • Low water usage
  • EasyClean filters
  • Removable anti-block wash and rinse arms
  • Optional thermostop for guaranteed rinse temperatures
  • Integral detergent and rinse aid dosing units
  • Simple, intuitive controls
  • Supplied with 2 glass baskets


  • 16 pint capacity
  • 2 filters
  • Cycle time of 2 minutes
  • Wash tank capacity 14Ltr
  • Boiler element: 2.8kW
  • Required water flow rate: 10lts p/min
  • Required water pressure of 2-4 bar (28-56 psi).
  • Standard 13 amp plug
  • Basket size 40cm x 40cm
  • Total load: 3kw
  • Useable washable height: 280mm
  • Drain Height: 120mm
  • 1 year parts only warranty


Width: 465mm

Height: 690mm

Depth: 510mm (with door open – 785mm)

PURCHASING GUIDE:  (this is a guide only; to discuss your individual requirements please call us on 01379 641223)

Do I need a water softener? All ware washing machines require a softener if the water supply exceeds 100ppm. By having an external or internal softener fitted to your machine you will greatly improve your washing results, reduce running costs and increase the life expectancy of your product. Please note that internal water softeners are only suitable for cold water. When connecting your machine to a hot water supply make sure you specify a hotwater softener.

Do I need a Break Tank? Type ‘A’ Break Tanks are a stipulation of the Water Supply (Water fittings) Regulations and Scottish Water Byelaws and should be fitted to machines that are to be used as commercial dishwasher is sites such as Hospitals, Hotels or any site that may come into contact with contaminated products. A Break tank provides an air gap in between the mains supply and the storage reservoir in the dishwasher. This eliminates the possibility of dirty or contaminated water backflow into the mains system as there is no contact between the two.

What electricity supply do I need? The electricity supply you need depends on the machine you are buying.  Look carefully at the ampage rating of the machine you are looking to purchase to ensure you have an adequate supply.

Do I need a drain pump? A drain pump is required when the waste services are higher than the drain outlet of the machine.

What water pressure & flow rate do I need? For your machine to operate at its ability you’ll need a water pressure of 2-4 bar (28-56psi). Anything less or more than this may adversely affect wash and rinse results.  If you have low water pressure consider purchasing an internal or external rinse booster pump. The minimum flow rate is 10 litres per minute.


Faulty installation, commissioning, misuse, or user related problems are not covered under warranty. Electrical appliances MUST be installed by a qualified electrician. A warranty call out will not be instigated without the name of the installing engineer

Additional information

Dimensions Depth 510 mm , Width 465 mm , Height 690 mm.


Cycle Duration

120 sec


Stainless Steel




13 amp standard plug

Power Requirement

Standard 13amp plug


1 years parts and labour warranty, 1 years parts only warranty as standard.


Free Next Day Delivery if ordered before 12 noon (Weekdays & Mainland UK only) Otherwise please allow up to 48 hours from ordering., Whilst we always try to ensure our stock levels are accurate we advise checking with us that the item is in stock if your order is urgent.



Basket Dimensions

400mm x 400mm

Built in Drain Pump


Chemical Pump


Integral Water Softener


View Details
View Details
View Details