DC EGP40 IS Economy Range Glasswasher with Integral Softener 400mm basket
DC EGP40 IS Economy Range Glasswasher with Integral Softener 400mm basket is a quality glasswasher from the Economy Range of DC. It has an increased washing height to accommodate specialist glasses such as Peroni, Bulmers, Cobra and Amstel. The DC Economy Range of glasswashers are an entry-level glasswasher focused on budget. Fitted with cost and energy saving features such as new energy saving wash pump this is a glasswasher ideal for those wishing to combine efficiency with superb product quality.
1 year parts only warranty is standard on this model. Option of 1 year parts and labour warranty is available (additional charge). Please select at checkout.
- Specially designed to fit Peroni, Bulmers, Cobra and Amstel glasses
- Low water usage
- EasyClean filters
- Removable anti-block wash and rinse arms
- Optional thermostop for guaranteed rinse temperatures
- Integral detergent and rinse aid dosing units
- Simple, intuitive controls
- Supplied with 2 glass baskets
- 16 pint capacity
- 2 filters
- Cycle time of 2 minutes
- Wash tank capacity 14Ltr
- Boiler element: 2.8kW
- Required water flow rate: 10lts p/min
- Required water pressure of 2-4 bar (28-56 psi).
- Standard 13 amp plug
- Basket size 40cm x 40cm
- Total load: 3kw
- Useable washable height: 280mm
- Drain Height: 120mm
- 1 year parts only warranty
Depth: 510mm (with door open – 785mm)
PURCHASING GUIDE: (this is a guide only; to discuss your individual requirements please call us on 01379 641223)
Do I need a water softener? All ware washing machines require a softener if the water supply exceeds 100ppm. By having an external or internal softener fitted to your machine you will greatly improve your washing results, reduce running costs and increase the life expectancy of your product. Please note that internal water softeners are only suitable for cold water. When connecting your machine to a hot water supply make sure you specify a hotwater softener.
Do I need a Break Tank? Type ‘A’ Break Tanks are a stipulation of the Water Supply (Water fittings) Regulations and Scottish Water Byelaws and should be fitted to machines that are to be used as commercial dishwasher is sites such as Hospitals, Hotels or any site that may come into contact with contaminated products. A Break tank provides an air gap in between the mains supply and the storage reservoir in the dishwasher. This eliminates the possibility of dirty or contaminated water backflow into the mains system as there is no contact between the two.
What electricity supply do I need? The electricity supply you need depends on the machine you are buying. Look carefully at the ampage rating of the machine you are looking to purchase to ensure you have an adequate supply.
Do I need a drain pump? A drain pump is required when the waste services are higher than the drain outlet of the machine.
What water pressure & flow rate do I need? For your machine to operate at its ability you’ll need a water pressure of 2-4 bar (28-56psi). Anything less or more than this may adversely affect wash and rinse results. If you have low water pressure consider purchasing an internal or external rinse booster pump. The minimum flow rate is 10 litres per minute.
Faulty installation, commissioning, misuse, or user related problems are not covered under warranty. Electrical appliances MUST be installed by a qualified electrician. A warranty call out will not be instigated without the name of the installing engineer