Mechline BaSix WS1-TX-BD Hand Wash Station with pair of AquaTechnix DOME taps

Mechline BaSix WS1-TX-BD Hand Wash Station with pair of AquaTechnix DOME taps is engineered from a single-piece, moulded high grade polycarbonate ABS plastic. The WS1 is ergonomic, attractive, strong and durable with no sharp edges.  Eco-friendly, the WS1 can be fully recycled and has lower embedded energy costs than traditional stainless steel basins.

This BaSix range allows you to build your perfect hand wash station. Choose your Basin and Choose your Taps.

This model is : WS1-TX-BD (WS1) Grey ABS polycarbonate basin (TX) AquaTechnix (BD) Dome Taps.

The BaSix Series has 5 basin choices:

WS1 – Grey ABS Polycarbonate (355 x 329 x 195mm)

WS2 – Stainless Steel (305 x 270 x 140mm)

WS3 – Stainless Steel with push front panel (300 x 320 x 195mm)

WS4 – Stainless Steel (384 x 333 x 138mm)

WS6 – Stainless steel with push front & integral splashback (360 x 270 x 100mm)

and 15 choices of Tap:

TX-BL: AquaTechnix pair of lever taps, TX-BD: AquaTechnix pair of dome taps, L: CaterTap pair of 3″ lever taps, D: CaterTap pair of dome taps, ML: CaterTap single lever tap with manual mixer, ML-T: CaterTap single 3″ lever tap with thermostatic mixer, MM: CaterTap monobloc, single lever mixer tap, KVS: Basix hands free knee operated spout with manual mixer, NT: Delabie hands free battery operated tap with manual mixer, T2: Delabie soft touch, time flow tap with manual mixer, T2-T: as T2 & with thermostatic mixer, NT4: Delabie hands-free battery operated tap non-mixer, NT4-T: as NT4 & with thermostatic mixer, MT: Delabie auto shut off single lever tap with manual mixer, MT-T as MT  & with thermostatic mixer.

PRODUCT FEATURES:

• Helps operations meet their requirement to provide hand-washing stations on site.
• Range of hygienic hand washing solutions.
• Good and safe habits are more easily followed and enforced.
• Grey WS1 basins are standard. White is available – please contact us.
• Model range: WS1
• Controls: Dome
• Accreditation: WRAS

WRAS APPROVAL: The Water Regulations Advisory Scheme (or WRAS) is an organisation that aims to advise, promote and standardise best practice amongst everyone involved in the UK water industry. To achieve WRAS approval or listing, the individual product or fitting must pass mechanical and water quality testing carried out independently by WRAS. WRAS states that ‘A water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be of an appropriate quality and standard.‘