Description
DC SD40 D Standard Range Dishwasher with Drain Pump 400mm Basket
DC SD40 D Standard Range Dishwasher with Drain Pump 400mm Basket is part of the DC range of frontloading warewashers combining speed, strength and reliability with intense cleaning ability and an easy to use control panel. This model is constructed using a double-skinned stainless steel cabinet and door to improve strength, thermal acoustic insulation and reduce running costs. The complete Standard range comes supplied with rinse and detergent dosing units and can be fitted with integral water softeners to help protect the machine and improve results.
1 years parts only warranty as standard. Additional warranty option available at checkout.
PRODUCT FEATURES:
- Heavy duty wash pump
- Removable anti-block wash and rinse arms
- Hydro dynamic basket slides
- 400mm basket
- Low water usage
- Easy Clean filters
- Optional thermostat for guaranteed rinse temperatures
- Self draining wash pump for improved hygiene
- Integral detergent and rinse aid dosing units
- Simple, intuitive control
Technical Specifications — DC SD40
- Cycle Time: 180 sec
- Basket Size: 400 x 400 mm
- Height: 690 mm
- Width: 475 mm
- Depth: 540 mm
- Depth with Door Open: 850 mm
- Usable Wash Height: 280 mm
- Drain Height: 120 mm
- Drain Diameter: 25 mm
- Wash Tank Capacity: 14 litres
- Boiler Capacity: 2.8 litres
- Water Usage: 2.4 litres per cycle
- Wash Element: 1.6 kW
- Boiler Element: 2.8 kW
- Total Load: 3.1 kW
Installation & Site Requirements
- Water Softener: Required if the water supply exceeds 100 ppm. This improves wash results, reduces running costs, and extends product life.
- Drain Pump: Required when the waste services are higher than the drain outlet of the machine.
- Break Tank: A break tank is required where mains water is used to prevent backflow and comply with water board regulations.
- Installation & Warranty: Electrical appliances MUST be installed by a qualified electrician. Incorrect compliance with current installation legislation will invalidate the manufacturer’s warranty and may pose safety risks. Please refer to the specification sheet for full electrical requirements and technical details.
For full technical and installation requirements, please refer to the manufacturer’s specification sheet (attached).
MODELS AVAILABLE
SD40 D – Standard Model + Drain Pump.
SD40 IS – Standard Model + Integral Softener
SD40 IS D – Standard Model + Drain pump, Integral Softener
SD40A – Standard Model + Break Tank
SD40A D – Standard Model + Break Tank, Drain Pump
SD40A IS – Standard Model + Break Tank, Integral Softener
SD40A IS D – Standard Model + Break Tank, Drain Pump, Integral Softener
